LonPoint Product Family
LonPoint Modules may be operated as a self-contained control system,
integrated with other LonMark or LonWorks devices, or combined with remote
systems and a remote supervisory station to form a wide area control system.
| Model |
Product |
Description |
40111 |
LonPoint Type 1 Base Plate (for use with LonPoint Interface and
Scheduler Modules) |
Mounts to 4" square by 2" deep electrical boxes or Echelon's
Eurobox; color-coded, wire clamp style screw terminals accept 12-24AW
(2 to 0.5mm) wire; U.L. Listed, cUL Listed |
41100 |
DI-10 Digital Input Interface Module |
4 digital inputs: 0-32VDC or dry contact; status LEDs for each
input; flash memory: download via network; U.L. Listed, CE Mark,
cUL Listed, LonMark (Discontinued) |
41200 |
DO-10 Digital Output Interface Module |
4 digital outputs: 0-12VDC; separate hand/off/auto switch and
status LED for each output; flash memory: download via network;
U.L. Listed, CE Mark, cUL Listed, LonMark (Discontinued) |
41300 |
AI-10 Analog Input Interface Module |
2 16-bit analog inputs: 0-24mA, 0-10V, 100�-15k�; supports current
loop or remotely powered devices; flash memory: download via network;
U.L. Listed, CE Mark, cUL Listed, LonMark (Discontinued) |
41400 |
AO-10 Analog Output Interface Module |
2 12-bit analog outputs: 0-20mA , 0-10V; PID controller; flash
memory: download via network; U.L. Listed, cUL Listed CE Mark, LonMark (Discontinued) |
41500 |
DIO-10 Digital Input Output Interface Module |
2 digital inputs: dry contact, 5V, 12V, 24V, 31V, 2 digital relay
outputs: NO and NC outputs are available for both outputs; hardware
support for high speed frequency measurement on both digital inputs
(up to 20KHz); U.L. Listed, cUL Listed, CE Mark, LonMark (Discontinued) |
48111 |
Type 1D DIN Base Plate (for use with LonPoint interface modules) |
The LonPoint interface modules can be wall or DIN-rail
mounted. Numbered, wire clamp style screw terminals accept 12-24
AW (2 to 0.5mm) wire; U.L. Listed, cUL Listed, CE Mark |
48222 |
Type 2D DIN Base Plate (for use LonPoint Router Modules) |
The LonPoint router modules can be wall or DIN-rail mounted.
Numbered, wire clamp style screw terminals accept 12-24 AW ( 2 to
0.5mm) wire; U.L. Listed, cUL Listed, CE Mark |
Note: LonPoint Modules (Model Numbers 41x00) are discontinued with Last time Buy date of December 31, 2006 and Last Time Ship date of March 31, 2007.
The system consists of the LonPoint interface and router modules,
LonPoint application programs, LNS-based LonMaker Integration
Tool, and the LonPoint LNS Plug-in.
The LonPoint Interface and Router Modules provide I/O processing,
application resources, and routing for a LonPoint System.
The interface modules seamlessly integrate sensors, actuators, and controllers
into peer-to-peer, interoperable networks. There are five different interface
modules: DI-10 Digital Input Module (4 digital inputs with a status LED
per input), DO-10 Digital Output Module (4 digital outputs each with a
separate hand/off/auto switch and status LED), DIO-10 Digital Input Output
Module (2 Digital inputs and 2 relay outputs with Status LEDs, and outputs
with a separate hand/off/auto switch) AI-10 Analog Input Module (2 independent
16-bit analog inputs), and AO-10 Analog Output Module (2 independent 12-bit
analog outputs with PID). All modules have a two-piece design that cuts
installation time and cost. Each also allows network access from front
panel jacks.
