Key Features

  • 802.11b/g/n 2.4GHz Wi-Fi interface implemented with a Marvell 8801 Wi-Fi transceiver
  • Compact 37.5mm x 20mm x 3.7mm stamp module form factor to simplify embedding into a variety of devices
  • Marvell 88MC200 microcontroller for running a device application and executing the LonTalk/IP control networking protocol
  • IzoT CPM 4200 Wi-Fi EVK available for rapid application development and testing
  • LonTalk/IP stack for simple installation and peer-to-peer connectivity
  • Compatible with the IzoT Commissioning Tool and the IzoT Router for easy installation with a wide variety of LonTalk/IP and classic LON devices
  • Interoperates with other LonTalk/IP and classic LON devices implemented with the IzoT SDK, IzoT FT 6000 EVK, or earlier generations of the LON development tools
  • Supports a rich set of LonMark and IoT standard profiles and data types to reduce application development time
  • ARM Cortex M3 architecture for supporting advanced device applications with comprehensive I/O capability
  • 1MB on-board flash memory for CPM 4200 system firmware, application firmware, and non-volatile data
  • 512KB RAM for data storage and the runtime stack
  • Supports expansion with additional off-chip serial flash memory
  • Two antenna options: on-board for ease-of-implementation or external for increased range
  • 40°C to 85°C industrial temperature range

Tech Specs

Processor

Processor

  • Marvell 88MC200 ARM Cortex-M3

Processor Clock

  • 32MHz

Processor Memory

  • 1Mbyte flash on CPM 4200 module
  • 1Mbyte flash on CPM 4200 EVB
  • 512Kbyte SRAM
Wireless Communications

Radio

  • Marvell 88W8801 radio
  • IEEE 802.11bgn, channels 1 – 13
  • 2.4GHz band
  • DSSS and OFDM modulation
  • Up to 54Mbps transfer rate
  • -82 dBm minimum sensitivity
  • STA mode, AP mode, can be used simultaneously
  • On-board or external antenna, selectable by application

Protocols

  • LonTalk/IP, TCP/IP, HTTP, HTTPS, TLS/SSL, DNS, DHCP, WPA, WPS

Radio Standards and  Certifications

  • USA: FCC 15C – FCC ID EW4DWMW077E
  • Europe: 
    • EN300 328 – Test Report 10614990S-B
    • EN301 489-1/-17 – Test Report 10614990S-A
    • EN60950-1 – Test Report 10614576H
    • EN62311 –
  • Canada: RSS-Gen Issue 4:2014 – IC 8093A-DWMW077E
  • Japan: TELEC T-401 – ID 007-AD0006
Available I/O Peripherals
  • 4 32-bit general purpose timers with selectable clock source, programmable clock divider, and pre-scalar
  • 2 universal asynchronous receiver transmitters (UARTs) supporting up to 115.2 kbps with auto flow control support and programmable data format
  • 2 I2C interfaces supporting up to 2 Mbps
  • 1 quad serial peripheral interface (QSPI) supporting up to 200 Mbps synchronous serial communication
  • 1 synchronous serial protocol (SSP) interface supporting SSP and SPI devices
  • 2 analog to digital converters (ADCs) with selectable decimation rates providing effective resolutions from 10 to 16 bits
  • 1 digital to analog converter (DAC) with 10-bit resolution and up to 500 kHz throughput
  • 17 general purpose input/outputs (GPIO) that can be configured as general purpose inputs or outputs
Operating Input Voltage

5V
Environmental Specifications

Operating Environment

  • Operating temperature: -40℃  – 85℃
  • Operating humidity: 20% to 85%

Non-operating Environment

  • Non-operating temperature: -40℃  – 85℃
  • Non-operating humidity: 20% to 85% 
Dimensions

37.5mm x 20mm x 3.7mm (1.48” x 0.79” x 0.15”)

Learn More

IzoT CPM 4200 Wi-Fi EVK Datasheet

DOWNLOAD

IzoT CPM 4200 Wi-Fi Module Datasheet

DOWNLOAD

IzoT Hands-on Lab

The shortest path from your ideas to real IIoT products.

Start Developing

IIoT Requirements

Learn how the IzoT Platform addresses requirements for Industrial IoT.

Download Whitepaper

Related Solutions

Building Automation

M2M

Transportation

Select Language: Japanese | Chinese